刀型闸阀的结构特点

一、可提升的闸板密封面，可刮除密封面上的粘着物，自动清除杂物。

二、不锈钢闸板可防止腐蚀引起的密封泄漏。

三、整体的不锈钢材质，可防止腐蚀破坏。

四、短结构长度，可节省原料、安装空间，也有效支持管道强度。

五、科学上的密封填料函设计，使上密封安全有效，经久耐用。

六、三角形的支架节省原材料，保证需要的力学性能。

七、阀体上的导向块使闸板正确运动。挤压块保证闸板有效密封。

八、阀体加强筋设计提高阀体强度。

九、不锈钢阀杆经久耐用，双头螺使用启闭更为迅速。

十、可任意选用驱动机构。

十一、v型闸板可作为调节阀使用。

刀型闸阀采用标准

一、阀门设计制造标准：jb/t8691、mss sp-81。

二、结构长度标准：gb/t15188.2、tappi tis405.8。

三、法兰标准：jb79、ansi b16.5。

四、检验试验标准：gb13927、mss sp-81、jb/t8691。

阀门选购须知

一、              用户选购时，必须注明阀门公称通径、压力及阀门连接所需标准，未注明时，以说明书尺寸给予制造。

二、              所需阀门如有特殊要求，必须注明特殊尺寸、特殊材质等各项参数，未注明，以企业规定材质给予制造。

三、              阀门驱动装置无特别说明，以本公司规定给予配置。

四、              用户提供阀门使用介质、温度、压力的，本公司则以给予选型。

使用说明

一、              用户在安装阀门前必须校对阀门型号、连接尺寸及注意介质流向，保证与阀门要求*性。

二、              用户在安装阀门时，必须弥留阀门驱动的必要空间。

三、              驱动装置的接线须按线路图进行。

四、              阀门必须定期保养，不得随意碰撞及挤压，以免影响密封。

structure characteristic of knife type gate valve

1、  it can rise sealing face of gate valve, scrape off the burs on the sealing faceclear away sundries automatically.

2、  the stainless steel disc can prevent from leaking that has been caused by corrosion.

3、  the full stainless steel material can avoid corrosive damage.

4、  short length structure can save original materialinstallation spacesupport pipe intension effectively.

5、  scientific design of upper sea stuffing box makes upper seal safeeffectivewear well

6、  triangular yoke saves original material to ensure demand the mechanical performance.

7、  the guiding bock on body makes disc move properlyextrusion block ensures disc to seal effectively.

8、  the body of valve with fortified design can increase the body intensity.

9、  stem in stainless steel wears welldouble head bolt openscloses faster.

10、it can se-lect any driving machine randomly.

11、v-pattern discs can be used as regulator valves.

the standardf knife type gate valve

1、  the standard valve design: jb/t8691、mss sp-81.

2、  the standard length structure: gb/t15188.2、tappi tis405.8

3、  the standard of frange: b79、ansi b16.5

4、  the standard of checkingexamination: gb13927、mss sp-81、jb/t8691

notice for shopping valve

1、  when purchasing ，customers must give clear indication of nominal diameter of valve, nominal pressureconnection standard。 if no indication, we may manufacture products according to qualification.

2、  if the demanded valve has special requirements，users should indicate special size ，special material etc .if no indication, we will manufacture products according to the stated material of enterprise.

3、if driving actuator of valve without special specification, equip it according to the company specification.

4、the medium ,temperaturepressure of the valve provided by users, the subjected  company will se-lect the model.

use manual

1、  before installing valves, user must check the model, connection dimension,flowing direction of the medium to ensure in accordance with the valve requirements.

2、  when installing valves , users should remain some needed space for driving valve.

3、  the driving actuator connect should according to circuit diagram.

4、  valve should be maintained timely, should not do any collisionextrusion randomly in case it affects seal.

主要性能规范 chief propertyspecification

主要零部件材质 material of main part

主要外形及连接尺寸 main externalconnecting dimensionsmm